Submit search
Quick Notes:– V3 & newer owners, see “Version Notes” below– 4mm thick skid plate– 1.5mm thick skid ribs– 38mm forward extension– 171.5mm wide– works with ARRMA gearbox case set #AR310427– works with Durango gearbox case set #TD210046The RPM Front Bumper and Skid Plate is structurally engineered to add much needed impact-absorption to the front of the Kraton / DEX8T, dramatically reducing the amount of impact force from a crash that gets transferred into the chassis. Our two-piece design incorporates a 4mm thick skid plate with 1.5mm skid ribs to the front of the truck, extending more than 1-1/2” (38mm) in front of the chassis and protects the front of that expensive aluminum chassis from skid and impact damage. We then bolt a huge, 3/8” x 1/2″ x 6-3/4” (9.5 x 12.7 x 171.5mm) curved oval bumper on top to help protect the body as well.
Each RPM Front Bumper and skid plate is molded in black from our exclusive blend of engineering grade nylons for unmatched strength and durability. All RPM molded products are 100% made in the USA and backed by our limited lifetime warranty against breakage.
Version Notes: If you own a V3 or newer Kraton running a #AR320432 front bumper, you will need to swap it with the front bumper / hinge pin retainer from #AR330230 before our bumper will work on your truck.
Tech Notes: The RPM Front Bumper and Skid Plate is designed specifically for the ARRMA Kraton & Durango DEX8T, yet will fit any ARRMA vehicle running stock gearbox case set #AR310427 and any Durango vehicle running stock gearbox case set #TD210046. Unfortunately, RPM cannot guarantee proper body clearance with any ARRMA / Durango vehicle not listed here (some body trimming may be necessary to clear the bumper on those vehicles).20200505 3-HRP
One of the highest dollar replacement items on any vehicle is the chassis, especially when that chassis is a 3 – 4mm thick aluminum plate. On ARRMA and Durango 1:8 and 1:10 scale vehicles, there’s absolutely no protection for the underside of the chassis. Rocks, roots, asphalt, etc, can all create nasty scabs, scrapes and dents that will eventually lead to the need for a replacement.
Help reduce skid and scrape damage by installing an RPM Rear Skid Plate to your favorite ride. The areas most prone to damage are at the extreme ends of the chassis and the RPM Rear Skid Plate protects the back end of the chassis plate with 4mm of RPM engineering grade nylons that are not only extremely tough and durable, it also slides up and over obstacles much easier than aluminum. The leading edge of our skid plate has been rolled to a thin edge to reduce the likelihood of it catching while the rear is a full 4mm thick for a long-lasting skid plate built to handle some serious punishment!
Notes: The RPM Rear Skid Plate for ARRMA & Durango 1:8 & 1:10 scale vehicles is designed to fit any ARRMA vehicle running stock gearbox case set ARA310427 and any Durango vehicle running stock gearbox case set #TDR210046.
Fits:
