Home > Airplanes > Power System > Turbines >

JetCat P200-RX Turbine Engine, 52 lbs Thrust
JetCat P200-RX Turbine Engine, 52 lbs Thrust
 
Price: CAD$6,300.00
Shipping: Free shipping North America

Stock Status:Contact us for availability

Item Number: 71117-0080
Qty:

Description Completion Items
 
P200-RX Turbine Engine, 52 lbs Thrust, by JetCat
JetCat P-200-RX turbine comes complete with HEAVY DUTY internal starter and includes: Jet-tronic ECU (fuel control electronics) GSU (Display and Programmer) LED I/O board Miniature fuel pump Electronic starting gas valve Electronic Fuel valve Fuel tubing, tubing connector set, filters, and cable set 2 cell, 3300mA LiPoly battery pack Starting gas tank Turbine mounting clamp Detailed instruction manual Internal kerosene starting plug for single fuel operation. Fast startup!
Thrust: 52 lbs @ 112,000 RPM
Weight: 5.53 lb (2510g)
Diameter: 5.12 inches (130 mm)
RPM Range: 33,000 - 112,000 RPM
Exhaust gas temp.: MAX 750°C
Fuel consumption: 25 oz per/min at full power
Fuel: Jet A1, 1-K kerosene
Lubrication: approximately 5% synthetic Oil in the fuel
Maintenance interval: 25 hours
Now Includes the ECU V10.0
The completely redesigned V10.0 ECU is three times smaller than the V6.0 ECU, yet has all its proven capabilities and more at a weight of only 26g!

The updated ECU comprises a high speed digital power bus for control and power supply of all engine peripherals (e.g. engine, fuel pump, solenoids, smoke pump, lighting systems, etc. ) with a minimum of wiring connections.

An on board precision pressure and ambient temperature sensor allows for optimum engine control, independent to environmental conditions.

Includes JetCat Mini-GSU
The JetCat Mini-GSU is an optional miniature Ground Support Unit (GSU). It comprises a 2x16 character alphanumeric backlit LCD display and 10 control keys.

Function wise it can be used as a 100% replacement for our normal GSU. Its small form factor and weight makes it ideally suited for permanent installation in the model.

Connection to ECU`s up to Version 6.0 is via a 8-pin miniature flatcable connector directly to the LED-I/O interface. Connection to ECUs from Version 10.0 is via a 6-pin miniature flatcable directly to the ECU or the LED-I/O interface or 8-pin flat cable to JetCat I/O-interface with charging option.

Share your knowledge of this product. Be the first to write a review »