IC-2000 is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000 is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET. When cured, IC-2000 is pliable enough to be carved with a hobby knife. IC-2000 is the best adhesive for R/C car tires.

IC-2000 has found many uses in industrial applications, such as rubber to rubber bonding by Beechcraft, carbon composite bonding by Boeing, rubber door seals by Volkswagen, speaker and subwoofer assembly in the audio industry and many others that need the most durable, shock resistant fast bonding adhesive that is available.

Works Best On:

• R/C Rubber Tires
• Glass & Metal
• Fiberglass
• Hard Plastics
• Rubber
• Reinforcing

Works Good On:

• Balsa Wood
• Soft Wood
• Hard Wood
• Ceramics
• Laminating
• Water-Resistant

Directions:

Screw on top and cap unit to puncture the seal on the tube Remove cap and apply IC-2000 CA to one side of the parts being joined, then hold them tightly together for 10-25 seconds for shock resistant joints. For larger bonding areas, apply serpentine beads of the CA, allowing for the spreading of the adhesive. For maximum flexibility, do not use with an accelerator. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 250º F. Top and tip can be soaked in acetone for cleaning.