Key Features

• Construction: Balsa and plywood
• Wing: Two-piece removable, with aluminum joiner tubes, dual servo aileron control
• Hatch: Removable for access to radio equipment, two painted pilot figures and cockpit detail
• Covering: Hangar 9 UltraCote
• Cowl: 11.5" (292mm) inside diameter with a slight taper
• Landing Gear: Two-piece prebent aluminum with 5.25" (135mm) diame main wheels, 1.8" (47mm) tailwheel
• Wheel Pants: Fiberglass, painted white and red to match covering scheme
• Spinner: Black plastic scale type, 3.7" (95mm) diameter
• Fuel Tank: Approximately 12oz (360cc)

In The Box

• Waco 50-61cc Gas EP ARF
• Prebuilt Wing
• Tail and Fuselage sections
• Landing Gear
• Wheels
• Spinner
• Decals
• Hardware
• Product Manual

Needed to Complete

• Radio: At least 8-channel
• Servos: Five high torque (2-aileron, 2-elevator, 1-rudder) One standard servo for throttle if using gasoline engine
• Building and field equipment
• Electric Power; Brushless Motor: 65cc ElectriFly Rimfire recommended Electronic Speed Control: If using motor listed above LiPo Battery: Two 6S Battery Charger: Compatible with selected battery Propeller: To match selected motor
• Gasoline Power; Engine: 50-61cc two stroke Receiver Battery: Two 6.0V, at least 2400mAh Building and field equipment Propeller: To match selected engine

Fiberglass wheelpants complete the scale look of the model and are far more aerodynamic than a bare wheel!

The removable wing aligns on an aluminum joiner tube for easier transport and assembly.

A large compartment allows easy access to your choice of onboard components.

A fun scale touch, two pilot figures are included for the removable compartment cover.