This is an optional RPM Mock Intake and Blower Set. Are you into scale realism on your favorite R/C rides? Perhaps you just dropped some brushless / LiPo power in your ride and want to show off to the world that your car is “supercharged”. RPM has just the thing to make that happen. The Mock Intake & Blower Set will take the scale realism of your favorite muscle car or monster truck to a whole new level and show off that muscle you know it has!

The RPM molded Intake and Blower Set is finely detailed with such finishing touches as blower belt ridges, pulley splines and recessed butterflies in the scoop. Additionally, bolt it on to almost any hood that is relatively flat by angling the entire unit to 7°, a very typical hood slope. That means the blower unit will sit properly and accurately on a wide variety of applications. It all bolts together with only 3 small screws.

The RPM Intake & Blower Set is available in blue or black, and comes complete with all the hardware you’ll need to bolt it to your favorite ride (you’ll need to supply your own 1/8” diameter [or 3mm] drill & a 2mm hex driver). It even includes a wide support plate that bolts underneath the body to help prevent hard impacts from ripping the blower assembly off of your vehicle!

NOTE: The RPM Mock Intake and Blower Set is for appearance only and is not a functioning unit. RPM warranty restrictions may apply due to the scale nature of the design. Please see RPM for warranty information.