• This is the first mid-size Goblin to accept up to 600mm rotor blades!
  
• The Kraken 580 works amazingly well with mini cyclic servo (torque over 8 Kg-cm). Kit includes servo mounts for mini-servos. Full size servo mounts available separately. The parts can already be ordered with KITS to have it for release date.
• The Kraken 580 utilizes the same battery trays as the Kraken 700
• Minimum motor shaft length is 26mm (We recommend using a 6mm diameter motor shaft).

TECHNICAL SPECIFICATIONS

• AIRFRAME weight: 1760gr ( with blades, no battery, no electronics )
• Main blade length: 550mm to 600mm
• Tail blade length: 95 to 105 mm
• Main rotor diameter: 1270 mm (with 570 mm blades included)
• Tail rotor diameter: 260 mm (with 95 mm tail blades included)
• Cyclic Servos: mini size 35 mm (standard size 40mm option )
• Tail Servo: standard size 40mm.
• Main Rotor ratio : 11.5 to 8.6 :1 ( 22T included: 9.4:1)
• Tail Rotor ratio : 5.3-4.9:1 ( 23T included: 4.9:1 )
• Typical motor : 4025 series, 6S 1000-1200 Kv, 12S 500-600 Kv
• Typical speed controller: 6S 120-140 A, 12S 100-130A
• Battery size: 6S 5000/5800 mAh, 12S 2600/3200 mAh.

Suggested Configuration:

- Budget Set up

ESC : HobbyWing 120LV / HobbyWing130HV /Tribunus 120LV / Tribunus 130HV

Motor : Scorpion 4025-1100KV / Scorpion 4025-520KV

Cyclic Servo : Torq CL1208 / KST X15-1208 / Torq BLS2208 / KST BLS815V2 / KST BLS915 V2

Tail Servo : Torq BLS0704T / KST BLS805X

-FancySet up

ESC :Kolibri 140LV/ Kolibri 140HV / YGE 135LVT / YGE 135HVT

Motor : Pyro 650-103L / Pyro 650-53L /Xnova 4025-1120KV /Xnova 4025-560KV

Cyclic Servo :XpertMM-3301-HV / Xpert KD1

Tail Servo :Xpert KD1T