The Tekno RC ET410.2 Competition 1/10 Electric 4WD Truggy Kit takes 1/10th Scale 4wd Truck Class to another level with the durability and handling improvements of the EB410.2. This includes features such as the taller one-piece adjustable wing mount, adjustable roll center rear hubs, 3.5mm hinge pins, and HD hinge pin braces. Plus, the truck kit includes stronger HD outdrives, redesigned rear arms with front-mounted shocks, as well as 18-degree low roll center spindle carriers to smooth the steering response while improving corner speed. Tekno has also redesigned the spindles with adjustable Ackermann plates to allow more precise tuning of corner entry and exit characteristics. Plus, all of these features and improvements have been added with no additional cost to the kit!

Features

• CNC 7075 Long Wear Chassis
• Larger 3.5mm HD Hinge Pins and Revised Hinge Pin Inserts
• HD Hinge Pin Braces w/ Revised Suspension Geometry
• Taller, Stronger One Piece Wing Mount w/ Height Adjustments
• 18 Degree LRC Spindle Carriers
• Spindles w/ Adjustable Ackermann Plates
• Adjustable Roll Center Rear Hubs
• Rear Arms w/ Front Mounted Shocks
• Stronger HD Outdrives and Diff Couplers
• Aluminum Front and Rear Camber Plates w/ Bulkhead Brace
• Optimized Reverse Bellcrank Steering System
• 13mm Big Bore Shocks w/ Revised Standoffs and Cap Bushing

Needed to Complete:

• 2/3 channel radio/transmitter
• 1/10 scale Buggy or Short Course ESC
• 540 size 6.5-8.5 turn or 540 size 4 pole 4000-4600kv motor
• High torque steering servo (at least 200oz/in)
• 32 pitch 15 to 19 tooth pinion
• 2s shorty LiPo battery (at least 5000mAh)
• 1/10th scale Associated offset stadium truck OR Traxxas Slash SC offset wheels and tires (Losi is NOT COMPATIBLE)
• CA glue
• Paint for the body
• Tools for assembly

TKR7202 Tekno ET410_2 Instruction Manual

TKR7202 Tekno ET410_2 Setup Sheet - Blank