Manual

Features

• TechOne Aeolus 31.5" Milled-Depron Flat Foam Bi-Plane TOHA1000

• Construction: 0.12" (3mm) thick EPS foam with carbon fiber truss system to add strength and eliminate flex

• Wings: One-piece

• Aileron Control: Dual servo

• Landing Gear: Rods with 1" (25.4mm) diameter plastic wheels, foam wheel covers and carbon fiber strip for tail skid

• Pushrods: Carbon fiber

• Building Time: Ready to fly in approximately three hours

Specifications

• Fuselage Length: 33.5" (850mm)

• Wingspan: 31.5" (800mm)

• Flying Weight: 5.3 - 6.3oz (150 - 180g) with battery

• Center of Gravity (CG): 2.36" (60mm) from the leading edge of the wing, measured at the center of the wing

• Control Throws* Sport 3D

• Ailerons: Up and Down 1.10" (28mm) 3.03" (77mm)

• Elevator: Up and Down 0.87" (22mm) 2.60" (66mm)

• Rudder: Right and Left 1.42" (36mm) 4.25" (108mm)

• *Control throws are measured at the widest point of the control surfaces

• Exponential Sport 3D

• Ailerons: 20% 45-55%

• Elevator: 20% 45-60%

• Rudder: 20% 45-60%

Package Contents

• Aeolus F3P 31.5" Flat Foam Biplane with landing gear, pushrods, wheels, hardware and instruction manual

Requirements

• Radio: At least 4-channel

• Servos: Four micro high-torque (2-ailerons, 1-rudder, 1-elevator)

• ESC: 8 - 10A brushless capable

• Motor: 250 or 300 Electrifly Rimfire Brushless recommended

• Battery: 2S 300mAh LiPo

• Battery Charger: LiPo compatible

• Propeller: 8x4 - 9x5 slow flyer

• Building and field equipment